'Shed Baron' Steel Garden Buildings
Grandale Metal Storage Sheds and Workshops

'Grandale' metal sheds and storage buildings by 'Shed Baron'. These steel storage sheds are available in the following sizes 6'x 3' - 6' x 4' - 6' x 5' - 6' x 6' & 6' x 7' Inside running sliding doors (pad lockable) and strong entry/exit ramp across the entire shed door opening width.

Features Hot Dipped Galvanised Steel throughout
with Superb 12 years anti-perforation warranty AND Ventilated Gables

6x5 Grandale Shed Baron metal storage Shed (Click for larger Shed Baron metal shed picture.)

Fully protect your precious garden equipment 12 year 'No-Rust-Perforation' guarantee. LOW maintainance. Lower Wall Height 178cm (5' 10") Ridge Height 193cm (6' 4") Made in Australia Rot & rodent free. Attractive Green colour Cream roof HOT DIPPED GALVANISED STEEL No Cracks - No Warps. Easy to install Practical - functional

SPECIFICATIONS OF STEEL USED IN THE ‘ Grandale Six ’ METAL SHED RANGE
Pre Painted Galvanised Steel Sheet – Utilised for the wall, roof and doors of the storage unit
Thickness	0.30mm	Base Metal Thickness (bmt)
Tensile	G550	High Tensile
Coating	Z18	180 grams of Zinc Coating per m 2
Paint Top Primer	5 mic.	Epoxy Primer
Paint Top Coat	18-20 mic.	Regular Modified Polyester
Paint Back Primer	5 mic.	Epoxy Primer
Paint Back Top Coat	10 mic.	Epoxy Light Grey
Galvanised Steel Sheet - Utilised for the frame of the storage unit
Thickness	0.55 - 0.7 mm	Base Metal Thickness (bmt)
Tensile	G300	Mild Steel
Coating	Z275	275 grams of Zinc Coating per m 2
COASTAL AREA CAUTION - The action of salt air, such as found in or near coastal areas could have an adverse effect on the fabric of the buildings shown on this web site. Accordingly, if any of the products are used in such areas, it is possible that some maintenance work will be required at some point during the life of the building, to combat the possible effects of surface deterioration caused by salt activity

TYPE	ROOF FRONT x SIDES	AT BASE FRONT x SIDES	HEIGHT APEX = RIDGE, PENT = FRONT LEAN-TO = PEAK	NO OF CARTONS (kg)
6 x 3	183 x 92 cm	171 x 82 cm	APEX 193 cm	1 (A = 44 kg)
6 x 4	183 x 123 cm	171 x 113 cm	APEX 193 cm	1 (A = 49 kg)
6 x 5	183 x 154 cm	171 x 144 cm	APEX 193 cm	1 (A = 54 kg)
6 x 6	183 x 186 cm	171 x 175 cm	APEX 193 cm	1 (A = 49 kg)
6 x 7	183 x 216 cm	171 x 206 cm	APEX 193 cm	1 (A = 64 kg)

Grandale 'Six' Metal Sheds Price list January 31st 2008
Nominal Size	Model Number	Shed Only	Timber Floor Kit	Translucent roof Panel	Hilti Screws &Drill	Base Size Width x Depth	CLICK to ORDER
6 x 3	FG63	£154	n/a	£15	£6	171 x 82	Order
6 x 4	FG64	£169	£65	£15	£7	171 x 113	Order
6 x 5	FG65	£189	£85	£15	£7	171 x 144	Order
6 x 6	FG66	£209	£100	£15	£7	171 x 175	Order
6 x 7	FG67	£229	£120	£15	£8	171 x 206	Order

ONE Piece Corner Shelf	Available for all models EXCEPT FG64BS	£15.00
THREE Piece Corner Shelf	Available for all models EXCEPT FG64BS	£39.00
Rear Mounted single shelf support approx 182cm	Available for all Grandale 'Six' models	£35
Rear Mounted twin shelf support approx 182cm	Available for all Grandale 'Six' models	£57
Window Kit / Cut Down Wall Panel	Available for all models EXCEPT FG64BS	£30
All prices include vat and delivery England, Wales and Glasgow & Edinburgh post codes.

Copyright 2003-2008 Metal Sheds Online
All rights reserved.