'Shed Baron' Grandale Steel Garden Buildings
Grandale 'Ten' Metal Storage Sheds and Workshops

'Grandale Ten' metal sheds and storage building by 'Shed Baron'. These metal storage sheds are available in sizes from 10'x 3' to 10'x 19' Inside running sliding doors (pad lockable) and strong entry/exit ramp across the entire shed door opening width.

Features Hot Dipped Galvanised Steel throughout
with Superb 12 years anti-perforation warranty AND Ventilated Gables

10x7 Grandale Shed Baron metal storage Shed (Click for larger Shed Baron metal shed picture.)

Fully protect your precious garden equipment 12 year 'No-Rust-Perforation' guarantee. LOW maintainance. Lower Wall Height 178cm (5' 10") Ridge height 203cm (6' 8") Made in Australia Rot & rodent free. Attractive Green colour Cream roof HOT DIPPED GALVANISED STEEL No Cracks - No Warps. Easy to install Practical - functional

SPECIFICATIONS OF STEEL USED IN THE ‘ Grandale Ten ’ METAL SHED RANGE
Pre Painted Galvanised Steel Sheet – Utilised for the wall, roof and doors of the storage unit
Thickness	0.30mm	Base Metal Thickness (bmt)
Tensile	G550	High Tensile
Coating	Z18	180 grams of Zinc Coating per m 2
Paint Top Primer	5 mic.	Epoxy Primer
Paint Top Coat	18-20 mic.	Regular Modified Polyester
Paint Back Primer	5 mic.	Epoxy Primer
Paint Back Top Coat	10 mic.	Epoxy Light Grey
Galvanised Steel Sheet - Utilised for the frame of the storage unit
Thickness	0.55 - 0.7 mm	Base Metal Thickness (bmt)
Tensile	G300	Mild Steel
Coating	Z275	275 grams of Zinc Coating per m 2
COASTAL AREA CAUTION - The action of salt air, such as found in or near coastal areas could have an adverse effect on the fabric of the buildings shown on this web site. Accordingly, if any of the products are used in such areas, it is possible that some maintenance work will be required at some point during the life of the building, to combat the possible effects of surface deterioration caused by salt activity

TYPE	ROOF FRONT x SIDES	AT BASE FRONT x SIDES	HEIGHT APEX = RIDGE, PENT = FRONT LEAN-TO = PEAK	NO OF CARTONS (kg)
10 x 7	307 x 216 cm	295 x 206 cm	APEX 203 cm	1 (B = 95 kg)
10 x 8	307 x 247 cm	295 x 237 cm	- “ -	2 (B + E = 102 kg)
10 x 9	307 x 278 cm	295 x 268 cm	- “ -	1 (B = 109 kg)
10 x 10	307 x 309 cm	295 x 299 cm	- “ -	2 (B + E = 120 kg)
10 x 13	307 x 402 cm	295 x 393 cm	- “ -	3 (B + D + E = 144 kg)
10 x 15	307 x 464 cm	295 x 454 cm	APEX 203 cm	5 (2 x B + 2 x E + F = 196 kg)
10 x 17	307 x 526 cm	295 x 516 cm	- “ -	5 (2 x B + 2 x E + F = 210 kg)
10 x 19	307 x 588 cm	295 x 578 cm	- “ -	5 (2 x B + 2 x E + F = 224 kg)

Grandale 'Ten' Metal Sheds Price list January 31st 2008
Nominal Size	Model Number	Shed Only	Timber Floor Kit	Translucent roof Panel	Hilti Screws & Drill	Base Size Width x Depth	CLICK to Order
10 x 3	FG103S	£249	n/a	£15	£9	295 x 82	Order
10 x 7	FG107S	£299	£185	£15	£10	295 x 206	Order
10 x 8	FG108S	£329	£210	£15	£10	295 x 237	Order
10 x 9	FG109S	£349	£245	£15	£10	295 x 268	Order
10 x 10	FG1010	£379	£310	£15	£12	295 x 299	Order
10 x 13	FG1013	£429	£395	£15	£12	295 x 393	Order
10 x 15	FG1015	£649	n/a	£15	£13	295 x 454	Order
10 x 17	FG1017	£699	n/a	£15	£13	295 x 516	Order
10 x 19	FG1019	£749	n/a	£15	£13	295 x 578	Order

ONE Piece Corner Shelf	Available for all models EXCEPT FG64BS	£15
THREE Piece Corner Shelf	Available for all models EXCEPT FG64BS	£39
Rear Mounted single shelf support approx 304cm	Available for all Grandale 'Ten' & 'Long Ten' models	£53
Rear Mounted twin shelf support approx 304cm	Available for all Grandale 'Ten' & 'Long Ten' models	£93
Window Kit / Cut Down Wall Panel	Available for all models EXCEPT FG64BS	£30
All prices include vat and delivery England, Wales and Glasgow & Edinburgh post codes.

Copyright 2003-2008 Metal Sheds Online
All rights reserved.