These heavy duty hot dipped galvanised steel frame kits are the perfect base for the 'StoreChoice' apex roof steel sheds and metal storage sheds. Easy to assemble before you construct the metal shed, there is no need for a traditional concrete or slab base - just perfectly level ground.

After the metal shed is fully erected and secured to the steel foundation kit - flood out the interior with concrete for a smooth floor or cover with timber or moisture resistant chipboard. A strong plastic sheet should be placed below the entire area covered by the foundation kit to prevent rising damp.

Please note that you only need one of the following three, Hilti Screw kit OR Foundation Kit OR Timber Floor Kit

For each metal shed we have available at extra cost a timber floor. The floor consists of boards and bearers - the metal storage building being sited subsequently on the completed floor and secured to through the holes of the metal sheds base rail. Timber boards and bearers are clear pressure impregnated treated.

Assemble timber floor and lay on level, well drained ground before assembling metal shed. Use timber pegs (not supplied) and drive into ground adjacent to floor bearers and securely nail to bearers.

Please note that you only need one of the following three, Hilti Screw kit OR Foundation Kit OR Timber Floor Kit

(For concrete or flagstone bases) - OPTIONAL.
A ready to use, quick set impact fastener with high expansion. Fits through pre-drilled holes in the metal shed's base rail. Masonry bit (15/64") supplied with the Hammascrews. Simply fix by drilling hole and then hammering in the drive screw. Can be removed with a cross recess screwdriver.

Please note that you only need one of the following three, Hilti Screw kit OR Foundation Kit OR Timber Floor Kit

The twin, inside running sliding metal doors glide open and close on Store More's exclusive pendulum glide system. No roller system can match it for reliablity and ease of operation. Specially designed inside tracks. They won't jump or jam in any season. These metal doors do not have sharp edges and the doors can be padlocked, if necessary twice. (Padlocks not supplied).Strong entry/exit ramp across the door width.